How To Flash Moto G52 XT2221-1 Firmware File (Stock ROM Guide)
- Mohammad Wasim
- Jul 4, 2022
- 3 min read
On this page, we are shown the download link and instructions on installing the Motorola XT2221-1 (Moto G52) firmware flash file with the fastboot process. Here you will discover almost all stock firmware zip files for all the supported regions with Motorola Moto G52 XT2221-1
If you are someone that needs to bring back the device to factory software, then that guide is for you. Applying this guideline, you are able to fix specific software-related problems for example hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter, and even you are able to downgrade the device anytime.
Must Read:
Ways to Install Moto G52 Stock Firmware (Flash File)
Now, if you’re prepared to flash the stock firmware manually on your Motorola Moto G52 XT2221-1 device then you have to download the flash tool, firmware file, and required drivers. Therefore, without losing any more time, let’s get into it.
Pre-Requirements:
This ROM is supported for the Motorola Moto G52 XT2221-1 (rhode) variant only.
Ensure that your device should be charged a minimum of 50% or higher.
You will need a COMPUTER or Laptop with a USB Data Cable.
We usually suggest that our visitors have a complete data backup of the device for safety.
Set up Motorola USB Drivers and Rescue and Smart Assistant Tool on your computer
To flash, you have to download the ADB and Fastboot tools. if you want to flash Stock Firmware with the RSD tool
Download Moto G52 XT2221-1 Stock ROM:
Flash File Name: S1SR32.38-40-2
Model: XT2221-1
Android Version: 12.0 Download
Firmware Installation Tutorial:
Read the firmware flashing tutorial below for the Motorola Moto G52 XT2221-1 First, be sure to install or extract the adb and fastboot tool on your computer. Now enter the bootloader on the device.
Step 1. Bootloader Mode
Get into bootloader mode on the phone. To boot first, switch your phone off. As soon as your device is switched off totally, press and hold the volume level down, and switch it on. You should see the bootloader screen.
Step 2. Link Your Device to COMPUTER:
Right after booting your Motorola Moto G52 into bootloader mode, now link it to the PC with the USB Cable connection.
Step 3. Download Stock ROM/Firmware:
To get the entire ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to anywhere on your computer. LMSA tool will unzip the file and will remove the zip file you downloaded.
You may also download the full stock ROM from the above download flash file section on this tutorial.
Step 4. Flashing Guide:
The next thing is to open the command window and go to the adb folder
Enter these commands in order to flash the software
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash bluetooth BTFM.bin
fastboot flash radio radio.img
fastboot flash dsp dspso.bin
fastboot flash dtbo dtbo.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10Toggle back to bootloader. Do the following:
fastboot flash erase userdata
fastboot flash erase carrier
fastboot flash erase apdp
fastboot flash erase ddr
fastboot flash erase metadata
fastboot oem fb_mode_clear
fastboot reboot
Now your device will restart in to the bootloader with the firmware you installed.
Комментарии